How to Fix Headphones When Only one Side Works

How to Fix Headphones When Only one Side Works

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on telegram
Share on whatsapp
Share on email

Table of Contents

Fix Headphones When Only one Side Works Just something’s broken doesn’t mean it can’t be fixed – especially if they’re good headphones you’ve invested in. Headphones break relatively quickly because we use them so often and misbehave with them. You are exposed to the rain and sun behind the airplane seat and under your bag.

So please don’t break your favorite couples when they break up. Check if you can fix them first.

This problem is a global dilemma. No matter how many headphones you buy, there comes a time when you can only hear audio from one side, and it can be a bummer.

So what is the possible solution? Is there any solution that can help solve this problem, or is it just an illusion?

How to Fix Headphones When Only one Side Works

Fortunately, there are many ways to achieve this, but it all depends on the type of headphones you are using. Repair techniques vary from pair to pair, so that you will need specific instructions. But no worry!

We got your back with this article; you will learn to fix your headphones and headphones in no time. Then find the answer and read a practical solution too.

Read Also 10 Best Headphones For Autistic Adults

Identify the problem for your headphones why only one Side is working.

The most common mistake in a pair of headphones is that the sound comes from only one Side of the headphones. This is often caused by crooked or faulty wiring.

Here’s how to quickly identify the problem:

Assess the headphone

Plug your headphones into another phone for problems. If yes, replace the headphone.

Make sure your headphones are not broken.

The first step when you discover that your headphone jack is not working is a clear one. It is quite possible that there is no problem with the headphone jack and that there is a problem with the headphones. You can quickly view it by simply connecting another device. It is not necessarily a Smartphone, A laptop, TV, or any other device with a 3.5mm jack onboard.

If you can’t hear any audio while using your headphones with another device, you will find the source of the problem. Just change your headphones, and you’re done. If they work fine with a different device, it’s something else to blame—time to try one of the other enhancements listed below.

We recommend connecting a different pair of headphones to your Smartphone before proceeding. Although rare, there is a chance that your original pair is not compatible with your Smartphone, even if they work with other devices.

Read Also Best Wireless Earbuds For Talking On The Phone – Buyers Guide

Repair broken plug

If the problem is not with the headset, it may be connected. Hold a soldering iron and solder, wire strippers, scissors, disordering braid, and a damp sponge to make this repair.

Lift the headphone cables slightly above the plug and remove any plug covers. Heat the soldering iron. Remove any existing pieces of wire from the wire contacts, using a braid and a soldering iron to notice where the color-coded wire segments connect Strip of insulation from the ends of the newly cut wire.

Reconnect the corresponding color-coded wire sections to the respective parts of the plug with a soldering iron. Wait for the solder to cool and replace the socket housing. Try your newly repaired headphones on.

Check the headphone jack.

Replace the other headphones to check if there is a problem with the headphone jack. Check the headphone jack for dust or other material. If the problem persists, take your phone to the service center.

Check side balance

If you’re using your headphones with a computer, check the audio speaker’s sides to determine if it can only be set to the right or left.

Check if the track you are playing is mono.

It is also often the case that a user is unaware of a mono track that they are playing and seems to have a problem with the headphone speaker. The mono track is played from one Side only on any speaker or headphone.

Read Also 10 Most Comfortable Headphones For Long Hours

Reconnect Bluetooth

Now play an audio file and see if the problem is resolved, and you can hear the sound on both sides, if not the next step.

Reset your wireless headphones

Some wireless headphones have the option to reset completely; you can refer to the manual of your headphones model to know how to do this, and does this solve the problem?

When you plug into the aux cable jack, the headphone jack port has little mechanical triggers (small metal balls with springs) that will turn off the Bluetooth functionality.

If only one Side of the speaker works when connected via Bluetooth (wireless), it means that one of the small mechanical triggers on the jack port is stuck in the middle position;

this allows the auxiliary audio cable to reach the speakers of the headphones. Bluetooth technology will tell you to work through it. This midpoint between the two functions will cause one of the speakers not to work.

Check the audio settings and restart the device.

There is also a possibility that the problem is not with the connector or headphones you are using, but with what to do with the device’s audio settings. If so, you will be able to fix it in no time. Just open the audio settings on your device and check the volume level and any other locations that can mute the sound.

Generally, Smartphone doesn’t have a lot of settings like these, so you have to eliminate the problem more or less. If there is one, it is.

If everything seems fair, but the headphone jack isn’t working, another simple solution you can try is to reboot the device. This can sometimes solve the uploading of various Smartphone related problems and takes less than a minute.

Just press and hold the power button and choose the reset option, wait for the device to turn on again, and then see if the problem persists.

So how do you fix it?

Try to move the SX cable plug and return the small ball of the mechanical trigger to where it was before pushing the cable plug into the connector port (and out) at different angles. This should work for you.

Trick to remove broken headphone plug from jack

In most electronic devices, a headphone plug that gets stuck in the connector can prevent you from hearing any sound from the device. You can use many different tricks to remove a broken plug from the connector without having to save or replace your device.


  • Know any remaining parts of the plug, which extend beyond the jack with needle-nose pliers. Twist the broken plug.
  • Apply a small amount of super glue to the toothpick’s tip and carefully insert it into the hollow part of the plug. Allow the gum to dry for approx five minutes. Pull the plug out of the socket. Be careful not to apply glue outside the edge of the plug or jack.
  • Insert the bit into the opening behind the jack. Rotate a little clockwise while pulling out. The edge of the bit will leave the edge of the jack and any remaining wire inside.

Step by step guide to fix your faulty/damaged headphone

I’m sure you want to get the most out of your device, regardless of how expensive or cheap your headphones are. See below and learn how to fix your headphones on your own.

Phase 1

To get your headphones fixed in no time, make sure you have a stock of the following devices that need to be repaired.

  • Defective headphones or earphones
  • A new jack connector
  • Soldering iron and solder
  • A cutter or wire cutter
  • Some match or lighter

Phase 2

The cat is first cut with a wire cutter or razor blade, whichever is available. To ensure the proper length of your earpiece, be sure to miss the point closest to the wire connected to the metal connector.

Phase 3

When replacing the connector or insulating the headphone cable, separate the wires from each other with a utility knife’s help Be careful because the cables are skinny and fragile. You can lose the desired length of your headphones by cutting them suddenly.

Phase 4

Strip the insulation with two of the three wires. Next, you should expose 1/4 inch of wire from all covered cables. The wired wire is the copper wire and is also the base of the unit.

Phase 5

Wrap the cables in a plastic sheath or sleeve. This step will prevent you from forgetting to repair it.

Phase 6

Check the channels of your headphones by running the wires exposed at the tip of the battery. Will click on the working Side of the handset. You must be careful when touching exposed battery cables as they should not be held long to avoid damage to the speakers.

Phase 7

Connect the cables: the left channel on the left and the right track on the right. You can also prepare the solder and make it easier by applying a little solder to each wire. You then need to continue the tinning process, which means melting and joining two solder wires.

Phase 8

Finally, you can now slide the jacket back onto the new welding cables.

With this simple process, you can quickly fix your headphones and use them in no time. If you still find them working as before, you can contact a professional.

If you don’t want to spend your money on new headphones, the repair is a good option. It is strongly recommended to take proper care of your headphones to make them last longer.

Over time, regular use of headphones can cause them to produce sound in only one ear, or sometimes the entire piece stops working.


We hope, now with the help of this article you can learn how to fix headphones when one way headphone is not working. Follow the steps correctly, and be sure to read the instructions carefully.

As long as you follow the instructions, it won’t happen until your headset starts working correctly. Now that you have the answer to the question, “Why can I only listen outside of headphones?” “You can take the right steps to solve the problem!

Amazon Site is a participant of the Amazon Services LLC Associates Program, an affiliate advertising program that is designed to provide aid for the websites in earning an advertisement fee by means of advertising and linking to Amazon products.


Best Wireless Devices



Avatar of Akbar Sheikh
About Author
An engineer and MBA, who is a technology and a gadget freak. I write about smart home solutions and gadgets like all wireless devices, technology brands like Apple. Love to follow the latest trends in the technology space and write about latest developments.