How To Configure Router To Use WPA2

How To Configure Router To Use WPA2, Automation is essential for a positive user experience; The faster a monotonous task can be completed, the more time users can focus on important activities. Network authentication works the same way. Setting up an operating system manually can be a daunting task, even with guides that guide the user through the process.

The problem is that the guide does not avoid the possibility of the user making mistakes due to a misunderstanding of high-level technical concepts. Failure to configure a single device can pose a serious security risk to the entire network. This opens a door for over-the-air credential theft and organization data may be at risk, not just end-user personal data.

This is where EAP-TLS differs from the rest by using WPA2-Enterprise certificate-based authentication. Certificate-based authentication ensures that only approved network users have access to the network.

A certificate-based network not only eliminates credential theft over the air, but it also provides a better user experience by eliminating credentialing credentials and cumbersome password change policies. The user has to enter his/her credentials only once to authenticate his/her identity and issue the certificate. After this process, they are automatically linked for the life of the certificate.

The SecureW2 suite works with each operating system so that end users can easily access self-service for WPA2-Enterprise. These are the differences between manually configuring your device for WPA2-Enterprise on different operating systems and using embedded software like SecureW2.

Read Also Is It Safe To Sit Next To A Wireless Router
How To Configure Router To Use WPA2
How To Configure Router To Use WPA2

Enable WPA on Router

·       Open a web browser on your computer and type your router’s IP address in the address bar. Most routers use “192.168.0.1”, “192.168.1.1” or “192.168.2.1” as the IP address.

·       If these IP addresses don’t work, check your router’s documentation. When prompted, enter your username and password to log into your router’s setup utility.

·       Click “Wi-Fi”, “Wireless”, “Wireless Configuration”, “Wireless Configuration” or a similar option in the initial menu of the configuration utility. Your wireless security options will now be displayed on the screen.

·       Select “WPA”, “WPA2” or “WPA+WPA2” in the “Security” or “Security Options” section of the page.

·       Enter a security key in the specified field and click “Apply” or “Save” to enable WPA on your wireless router. Click the “Logout” button to log out of the setup utility.

How To Configure Router To Use WPA2
How To Configure Router To Use WPA2
Read Also What Happens When You Reset your wireless router

Wi-Fi security development

When you install a wireless router in your home or office, you establish a wireless network. This network is made up of all the devices that are connected to the router. Depending on how you feel about its security, you can configure it to be open or secure by implementing a specific security protocol.

If you leave the setting to ‘Open’, anyone within range of the signal will be able to use it. No password is required. You can do this if you live in a remote location and the chances of uninvited users falling into this range are very low. In any other case, you will need some protection against the bad guys with IT skills.

In 1999, to improve the security of wireless networks, people created WEP, which stands for Wired Equivalent Privacy Protocol. It used a 40-bit encryption key.

Hackers quickly hacked it and made it obsolete. Right now, if you want to find a network device that still uses and supports WEP, you’re going to have to work hard. Yes, how bad is that.

WPA, or Wi-Fi Protected Access, was the next step in the evolution of Wi-Fi security. WPA was better because it used better encryption called TKIP. Since it was a game of cat and mouse between hackers and security developers, the bad guys soon figured out how to break TKIP.

The protocol was vulnerable to various hacker attacks, prompting the development of WPA2 and Advanced Encryption AES – Advanced Encryption Standard Protocol. Although it has some vulnerabilities, WPA2 provides adequate security for most applications. However, improving security is an ongoing process. WPA3, the most recent iteration, was introduced in 2018. It has one of the biggest developments in Internet security and encryption for wireless networks.

Read Also Why Do I Keep Getting Kicked Off Wi-Fi

Navigation interface

Most router configuration interfaces are divided into basic and advanced sections. To protect our network, we first need to find wireless security options. They are usually found in the Basic section in Wireless.

The way most of us get to the right screen is to start clicking on anything that mentions ‘wireless’ or ‘security’, and that’s when you find something in the lists above. Huh. Huh. If you do, you know you are at the right place. Right Place. Right Place. place. You can’t break anything by clicking on the interface until you hit save.

Once we’ve found the appropriate wireless security screen, we’re ready to start configuring our network security.

Based on the GOOD section above, we will configure our network security to read ‘WPA2’ and ‘AES’. If the configuration includes a reference to ‘PSK’, that’s fine.

If the settings include a reference to “Personal”, that’s fine too. The important thing is that your network security settings read ‘WPA2’ and ‘AES’ and do not include anything from the AVOID section.

Read Also Can You Use More Than One Wifi Extender
How To Configure Router To Use WPA2
How To Configure Router To Use WPA2

Using WPA2-Personal (PSK)

How To Configure Router To Use WPA2, To enable WPA2-Personal Security, start by entering your wireless router’s IP address and/or access point in a Web browser, log into Control Panel, and find Wireless Security Settings.

If you don’t know your router’s IP address or can’t remember the password, see the notes in the previous section.

Once you find the wireless security settings, select WPA2 Security and AES Encryption. Then enter a pre-shared key or passphrase of 8 to 63 alphanumeric characters. The longer and more complex, the safer. Try uppercase and lowercase letters and numbers. Write it down and keep it in a safe place. Don’t forget to save/apply the changes.

Now you’ll need to enter the same passphrase on your Wi-Fi-equipped computers and devices. In Windows, you should be prompted to enter this when connecting. However, if you were previously using WEP or WPA, Windows cannot connect until you edit the saved security settings:

In Windows XP, double-click the wireless network icon in the lower-right corner of Windows, click Reorder Preferred Networks. Then double-click the network name and change Network Authentication to WPA2-PSK, change Data Encryption to AES, and enter the password twice in the Network Key field.

Read Also Can The Wifi Owner See What I Search For?
Avatar of Stewart Scott
About Author

Latest

0 Shares