How To Connect AirPods To Oculus Quest 2

If you’re looking for the answer to the question, “How to connect AirPods to Oculus Quest 2 VR headset?” then the answer is YES you can by following the simple steps mentioned below

Step 1: – Ensure that AirPods are charged to maximum capacity and are placed inside the charging case. Don’t remove them as of now.

Step 2: – On the back of your charging case, press and hold the pairing button long enough until the light on the front starts flashing

Step 3: – Now switch ON your Oculus Quest 2 and on the bottom right you will find the wifi and battery symbols side by side.

Step 4: – Now click on the settings tab which is on the top right corner.

Step 5: – Now click on the button which says, “Experimental Features”

Step 6: – Now you will see 3rd option as Bluetooth Pairing. Next to it, you will see the option for Pair? Click on it and you might have to wait between 30 secs to a minute before you see the option, “Ready To Pair”

Step 7: – Now just go through the list of devices available and select your AirPods. Make sure they are in pairing mode which we covered in Step 2.

You’re Done! You have successfully connected your AirPods to your Oculus Quest 2.

Can Any Bluetooth Headphones Be Connected To Oculus Quest 2?

It can be a little tricky to connect Bluetooth headphones to the Oculus Quest 2, but it’s not impossible. Yes, you can by following the steps as mentioned below.

First, make sure that your Bluetooth headphones are turned on and in pairing mode. You can usually find the pairing mode by looking for a button on the headphones that need to be pressed for three seconds. Once you’ve found it, press and hold the button until the light starts flashing.

Next, open up Settings on your Oculus Quest 2 and select Experimental Features > Bluetooth Headphones. This will bring up a list of all of the devices that are currently paired with your headset. If your headphones don’t appear on this list, try pressing and holding the pairing button again until they do.

Once your headphones are successfully paired with the Oculus Quest 2, you should see their name displayed in the list of paired devices. If you experience any audio or video stutters while using them with VR games, we recommend trying another pair of headphones instead since the Oculus Quest 2 doesn’t have a strong enough processor to handle them properly.

How To Connect Noise-Cancelling Headphones with Bluetooth

Yes, you can but the process is a little different as explained below.

First, make sure that your headphones are Bluetooth enabled. This will ensure that they are compatible with all Bluetooth devices. If they are not already enabled, consult the manufacturer’s instructions to do so.

Once your headphones are connected to your desired device via Bluetooth, it’s time to connect them to the Oculus Quest 2! To do this, use the included 3.5mm headphone jack located on the side of the Quest 2 headset. Simply plug in the appropriate audio cable (usually provided with noise-canceling headphones) into the port and then into your headphone jack. You may need to adjust the volume on both devices accordingly.

That’s it–you’re now ready to enjoy your favorite tunes or games without any annoying wires getting in the way!

Performance Issues You Might Face After Connecting Oculus Quest 2 with Airpods

Video or Audio Shutter

Many users have reported that they are experiencing video or audio shutter while using the Oculus Quest 2 with Airpods. This problem is caused by the audio and video stuttering, which makes games rendered unplayable. Some users have even gone back to their older Oculus Quest because of this issue.

Lagging or Out of Sync

If you’re having trouble with audio or video lagging, out of sync, or choppy playback on your Oculus Quest 2, there are a few things you can try.

Now, this audio lag is not related to your AirPods. It’s mainly due to the limitations in the BlueTooth settings of the Oculus Quest 2.

Snapdragon XR2 is the chipset used in the Oculus Quest 2 which in turn uses Qualcomm Fastconnect 6800 for BlueTooth. The Qualcomm Fastconnect 6800 does not support AptX low latency implementation.

First, make sure that both your Airpods and the Oculus Quest 2 are fully charged. If they’re not, try charging them for a while and see if that fixes the issue.

Second, check to see if you have AptX enabled on your Quest 2 headset. To do this, open the Settings menu and select Devices > Bluetooth > More Options > AptX HD. If it’s not enabled already, enable it and restart your headset.

Third, reduce the number of apps and games running on your Quest 2 at the same time. The more tasks your device is trying to handle simultaneously, the slower it will run. Close any apps or games you’re not currently using and see if that helps improve performance.

Do Bluetooth Headphones Have Performance Issues With Oculus 2?

When it comes to connecting Bluetooth headphones with the Oculus 2, there are some potential performance issues that you should be aware of. In general, the frame rate will be lower if you use a Bluetooth headphones with the Oculus 2 than if you use the headset’s built-in sound system. This is because the audio processing is done by the external device when using Bluetooth headphones, which can lead to some latency in your audio.

Furthermore, there are compatibility issues between devices that are connected via Bluetooth. This means that they may not work as quickly or effectively together as they would individually. As a result, you may experience some slow processing speeds or game stuttering when using a non-compatible device such as Bluetooth headphones with your Oculus 2.

Does the Quest 2 have finger tracking?

Yes, the Quest 2 has finger tracking! The motion controllers on Oculus Quest 2 and Quest can track your hands to detect finger placement. This is made possible by the inside-out camera system.



Avatar of Stewart Scott
About Author

Latest

0 Shares
Copy link
Powered by Social Snap