When it comes to transforming a home after building a smart home, one must decide what to bring and what to leave behind.
It’s easy to spot on devices like speakers and smart plugs, but not easy when it comes to more permanent features like thermostats and door locks. For this article, we will look at the smart thermostat.
When installing a thermostat, you will likely sell, recycle, or dispose of the old thermostat. After all, it’s no use, and the replacement brings smart features and potential cost savings to your home.
But when it comes to transferring ownership, what should you do? If you have the foresight to keep it, you can either replace the old thermostat or decide to give up the Nest.
The advantage here is that the buyer can already pay a small premium for a home with smart devices like a connected thermostat. If you go this route, you will need to ensure that you are completely disconnected from the thermostat so that you cannot control it and that the buyer is logged in with his or her own credentials. Watts can be done.
You have to reset your thermostat; Please do not restart it as it is only a restart and is designed to help troubleshoot problems with the device. ReiBoot erases some or all of your data and references from the system depending on the approach you take. For this example, we will see a hard reset that returns the thermostat to its new position.
Before starting the reboot process, you should write down the settings so that the new owner can quickly get hold of the system. To do this, go to Settings and then Tools on the thermostat. Now write down your system wires, heating type, and safety temperature settings.
Now before restarting, you must remove the thermostat from your Nest account. To do this, follow these instructions:
The initial steps in the Google Home app start with:
Read Also How to Connect to 5 GHz wifi Windows 10
In the Nest app, select the home you want to edit. In Settings, tap on the product you want to remove.
Scroll down to select Remove Nest Thermostat.
Confirm your choice.
If you don’t plan to use your Nest thermostat again, you’ll need to do a factory reset. This will erase all settings that you have made to allow a new user to start over with the product settings. This is useful if you are moving out of your home or need to install your thermostat in a new location.
Link Nest accounts to installed systems
Once you’ve fully set up your device, or if you move into a home that has Nest devices built-in and you’ve added your new location, you’ll need to reconnect your products to your Nest account. Will have to do you have to connect. You have to connect. I want to join, I want to join. You have to join.
To do this, navigate to the menu icon in the top left corner of the screen and search for the new address. Click on the Settings icon and then find the “Add Product” bar. While the Nest Protect and Nest Cam use a QR scanner to connect, the Nest Thermostat requires you to enter an entry key that appears on the thermostat’s screen. Once you’ve scanned or entered an identification code, the Nest app guides you through a few easy steps for each product so you can quickly connect to your new home.
How do I factory reset my Nest Thermostat?
If you are planning to sell your Nest thermostat, it is important that you perform a factory reset on the thermostat. This will delete all stored settings so the new owner can start over again when setting up the thermostat in their home.
If you have a Nest thermostat and want to remove just one owner, you don’t have to go through this process. If your Nest thermostat is on the same property and in the same location, never do a factory reset. Trying to set everything up again is too much trouble.
To factory reset a Nest thermostat, you’ll need physical access to the thermostat. You won’t be able to do it remotely.
There is no way to undo this process, so make sure you really want to factory reset your Nest Thermostat before pressing the confirm button.
How to remove the Nest thermostat
Now that you have successfully reset your Nest Thermostat, you can proceed to remove it. This can be a confusing process, so be sure to follow the steps correctly to avoid accidents.
Step 1: turn off the Nest thermostat completely
If you want to remove your Nest thermostat, this is a step you cannot forget. Failure to turn off the power before removing the thermostat could result in serious injury.
Go to your home breaker box and find the breaker that is connected to your thermostat. Make sure you’ve turned off that breaker.
If you’re not sure which switch leads to your thermostat or if there are other connections, don’t hesitate to call an electrician. It is better to pay a relatively small fee than to have an unnecessary accident.
Step 2: Prepare the necessary tools
You will only need three items to remove your Nest Thermostat. Items include a screwdriver, tape, and a non-contact voltage tester. You may also consider wearing some gloves, but this may not be necessary if you turn off the power properly.
Step 3: take out the Nest thermostat
Grab the Nest thermostat now and start pulling it out. What you are pulling is the drive itself and not the board that surrounds it. To remove the thermostat, apply some force and pull the wires down.
Step 4: Test the wiring
Removing the Nest interface will give you access to the cables that power it. Now you should take this opportunity to test those wires for any voltage.
Take your non-contact voltage tester and use your probe to get a reading of the exposed wires. Hopefully, the reading will indicate that the correct breaker has tripped.
If you still get a voltage reading, go back to your breaker box and reconnect the correct breaker. Again, if you want to be sure which switch to turn off, don’t hesitate to call an electrician.
Step 5: Get the cable out of the way
Now that you’re sure the wires can’t electrocute you, start getting them out of the way. Push the tab down on the thermostat terminal and begin pulling the wires out.
You will see that all the cables are bundled into a single cable. Take that wire and pull it slightly out of the wall. Use your masking tape to secure the cord to the wall so it doesn’t interfere with your work.
Step 6: separate the plates
Now you can start removing the plates that help secure the Nest Thermostat to the wall. Your thermostat may be based on the motherboard only, but others also have a decorative plate. No matter which plates are used, you will have to remove them all with your screwdriver.
Step 7: store the components
If you plan to use your Nest thermostat again, remember to keep all of its components in a sealed container. Small pieces are easy to lose, so keep everything in a container in the meantime.
Amazon Site is a participant of the Amazon Services LLC Associates Program, an affiliate advertising program that is designed to provide aid for the websites in earning an advertisement fee by means of advertising and linking to Amazon products.