How to Reset a WiFi Router

This may sound simple, but one of the easiest ways to fix a wide variety of technical issues is to simply restart a WiFi router. Whether it is your computer, your router, or your modem, a good ‘old-fashioned way of rebooting the device can solve the problems you feel. also, know What is My Router’s IP Address?

But, I must step back and explain a bit more. If you are restarting your computer, make sure you have saved anything that you do not want to lose. If you haven’t already included it in your normal computer usage – always save, back up, or close the program properly before resetting!

If you are rebooting your home router or modem, the first thing you need to consider is how you adopt it.

Read Also How to Setup a Router Without a Modem

How To Reset a WiFi Router

One Of The Most Common Questions Are: –

How to Restart a Router?

How to Reboot a Router?

How To Reset a WiFi Router?

Terminology may vary in different ways. People differ from one another to use the phrases “restart,” “reboot,” and “reset”, but the meanings of these phrases can vary greatly.

“Restart” and “reboot” mean the same thing: turning the device off, then back on immediately.

Most computers have a “restart” button somewhere, but if it is called a “reboot”, no worries. All are same.

The main problem starts when using the word “reset”.

In the case of your home router or modem, the “reset” is usually a pinhole button on the back that completely erases all settings and sets you back in a square. Generally, this is not what you want to do. Resetting your modem and / or router should be a last resort.

Read Also 10 Best Docsis 3.1 Modem Router Combo – Buyer’s Guide

The Simplest Way To Reset a WiFi Router

Reboot your router

On many routers, if you hold down the button for 10 seconds, this factory resets your router. If that doesn’t work, try the 30-30-30 method:

  • Hold in the button for 30 seconds.
  • Unplug the router for 30 seconds.
  • Plug the router back.
  • Hold down the reset button for 30 seconds.

Reset Your Router

The following settings are changed when you reset your router:

  • router username and password
  • Wi-Fi username and password
  • ISP username and password
  • Any port you have installed
  • Any firewall settings you have made
  • Basically, any configuration changes you have made to your router.

As you can probably tell from the list above, resetting your router is a serious business. proceed with caution.

  • To reset your router, find the small reset button that is usually located on the back of the router.
  • When the router is powered on, use the pin or end of a paper clip to press and hold the reset button. If you need to hold for about 10 seconds.
  • Generally, you will want to wait for the lights to change on the router. Depending on the make and model of your router, the lights may start blinking and turning to solid or they can change to solid and blinking.

When you let the reset button go, the router should reset to factory settings.

Read Also How Many Mbps Do I Need For Gaming and Streaming

3 Methods To Reset a WiFi Router If Above Method Doesn’t Work

1. Physical Plug Unplug (Hard Reset)

Physically Unplug To Reset a Router

Resetting a wireless router is a fairly simple task, but the consequences are very serious, meaning you’ll need to spend a lot of time setting your everything back. When you reset the wireless router, you will lose all settings, including the following:

  • username
  • password
  • ISP username
  • port you have installed
  • firewall settings

Just about every modern router can be reset by following a very simple process. Either flip the router upside down or look back for a small hole with the word RESET. Now all you have to do is find a small paper clip and put one end in the hole while the router is on.

Generally, you need to hold the button for 10 to 15 seconds. At this point, you should see the wireless router lights flash, blink, or simply restart. Once it reboots completely, the router returns to its original factory default state.

Read Also Best Wireless Router With Parental Controls and Time Restrictions

2. Power On & Off – To Reset Your WiFi Router

How to Reset a WiFi Router 1

The power to close and reopen the router is called power cycling. This is used to remove glitches that cause a router to drop connections such as corruption or overheating the unit’s internal memory. Power Cycles do not erase passwords, security keys, or other settings saved using the router console.

To power the router:

  • Turn off the power to the router. Either turn off the power switch or unplug the power cord.
  • On the battery-powered router, remove the battery.

It is not necessary to wait more than a few seconds between unplugging and resetting the router power cord. With a hard reset, it takes time after the power is restored for the router to resume operations.

3. Soft Reset (Web Admin)

How To Soft Reset A WiFi Router

The third way to reset the router is to restore the factory defaults from inside the web admin interface. While troubleshooting Internet connectivity issues, can help reset the connection between the router and the modem. This may involve simply removing the physical connection between the two, not manipulating the software, or disabling power.

Compared to other types of resets, soft resets come into effect almost immediately because they do not require rebooting the router.

To perform a soft reset, unplug the cable that connects the router to the modem, then reconnect it after a few seconds. Some routers may have a different way to perform a soft reset:

  • Look for the disconnect / connect button on the console. This loses the connection between the modem and the service provider.
  • Open the router console and in the menu, select Reset Factory Defaults or something similar. This feature replaces the router’s custom settings (such as passwords and keys) with the original reset, without requiring a hard reset at the factory.

• Locate the Security Reset button on the Wi-Fi console screen. Press this button to change the router’s wireless network subset of options, with shortcomings as you leave other options unchanged. Notably, router name (SSID), wireless encryption, and Wi-Fi channel number options are all back.

Read Also What Happens When I Press the WPS Button On My Router


As you can see, there is much more you can think of first than learning how to overhaul your router. Unfortunately, it is not possible to solve all the problems with the network reinstatement modem. More complicated problems require more diagnostic and problem-solving techniques, but this is the subject of a separate article.

Amazon Site is a participant of the Amazon Services LLC Associates Program, an affiliate advertising program that is designed to provide aid for the websites in earning an advertisement fee by means of advertising and linking to Amazon products.

Avatar of Akbar Sheikh
About Author
An engineer and MBA, who is a technology and a gadget freak. I write about smart home solutions and gadgets like all wireless devices, technology brands like Apple. Love to follow the latest trends in the technology space and write about latest developments.

Leave a Comment