How To Unscrew MacBook Pro Screws, Beginning with the 15 ″ MacBook Pro in mid-2009, Apple began using special 5-point security screws to prevent users from accessing the interior of their devices. They are now used in all Apple laptops and phones.
How To Unscrew MacBook Pro Screws, Apple uses several pentalobe screws of different sizes. First, whatever you do, don’t try to unscrew the pentalobe screw with a regular Phillips or Torx screwdriver. Forever, you will remove the head and once you do, there will be no way to loosen the screw, not even with a proper screwdriver. If you could bear your head.
Read Also How To Change Snooze Time On iPhone
Unscrew MacBook Pro Screws
- Disconnect your MacBook from the AC adapter.
- Turn the MacBook over so that you can access the battery compartment.
- Unlock the battery and remove it from the computer.
- Discharge static electricity from your body by touching a metal object or wearing an antistatic wrist strap.
- Remove the L-shaped bracket inside the battery compartment by loosening the screw with a Phillips screwdriver. Take the L-bracket out of the battery compartment.
- Lift the brackets on the back of the L-bar to free the memory card from the slot. Hold the memory cards by the sides and gently pull them out of the MacBook.
- Grab the plastic tab on the top of the unit and gently pull it out. Keep pulling until the transmission and track are out of place.
- Using the screwdriver, loosen the two small 2.5 mm screws on the inner edge of the battery compartment next to the side of the case. Remove the three 4mm screws from the back of the battery compartment on the inside of the MacBook. Remove the second, fourth, seventh and ninth screws on the outside of the machine toward the battery compartment.
- Loosen and remove the outer screws. There are three screws on the bottom of the case, two on each side and four on the back.
- Gently lift the upper half of the case. Don’t pull too fast as it is still attached to the trackpad cable inside the case. Press the black tab on the top of the cable and gently pull it out of the rail socket.
Read Also How To Clean iPhone Charging Port
The Right Screwdriver for Mac: General Tips
First, some basic rules. For one thing, you get what you pay for with screwdrivers. Ultimately, it won’t be a good investment. And for a difference of a few pounds, you can get a screwdriver that does the job without chewing.
Regardless of marketing rationale, the metal used for plating isn’t likely to make much of a difference here, and nearly all screwdrivers are made of steel shafts. But you get what you paid for. A high carbon steel screwdriver will last longer and be less likely to bite into a stronger screw.
Most importantly, when removing the screw, you should never use a very large screwdriver. Using too small will be difficult, but two large ones will damage the screw. And not only will it spoil the aesthetics and ruin the finish of your Mac, but it will make it nearly impossible to remove that screw in the future.
How do you open glasses without a screwdriver?
To loosen the screw without a screwdriver, use a butter knife, coin, credit card, or tin to turn the screw counter-clockwise. You can also grab the screw with pliers and try to loosen it that way. If it’s a small screw, use the tip of a knife or pliers to loosen it.
Why does Apple use pentalobe screws?
Consumers tell us that Apple is switching to a new special screw that some call the pentalobe, a five-prong tamper-proof screw. It is designed to prevent people other than Apple from repairing your iPhone or computer.
Read Also How To Get Samsung TV Out Of Demo Mode
You also need to think about how to loosen the stuck screw.
At the first sign of trouble, spray the screw with a rust inhibitor. Allow the penetration to last for at least 15 minutes. Then spray again and strike the screw head several times with the hammer. Then try again with the screwdriver.
Other tools to fix Apple gadgets
How To Unscrew MacBook Pro Screws, During the repair process, it is very convenient to store small parts, components, and screws in utility component storage boxes.
Another easy thing to do before starting the repair process is to place a special mat on your work surface. There are mats with ESD protection functions and some mats have built-in cells where small components can be placed.
To avoid losing or mixing screws during device repair, try using special screw positioning plates. They look like iPhone-patterned cards and holes to keep the screws in the correct order.
You must use the suction cup to lift the screen/touch screen of the iPhone. This may be the simplest suction cup with a more convenient ring or suction cup. There are even more advanced tools: suction tweezers to lift the screen.
It is very convenient to disassemble the device and work with small parts using tweezers. There are many tweezers designed to work with SMD components, as well as ESD-protected tweezers.
Read Also How To Lock MacBook Keyboard