Samsung Wireless Charger Blinking Yellow, Overall, compared to their wired counterparts, Samsung’s wireless chargers not only eliminate a lot of hassle but also offer a lot of conveniences. The working principle of wireless chargers made by Samsung is also sensible, so everyone can use them to recharge the batteries of various devices.

However, it should be noted that Samsung wireless chargers still activate from time to time during operation. There are many Samsung wireless charger problem reports today and some of them share the same theme – Samsung wireless charger flashes yellow.

Samsung Wireless Charger Blinking Yellow
Samsung Wireless Charger Blinking Yellow

What does it mean when your wireless charger is Blinking?

Many wireless chargers use yellow in the LED light to indicate charging problems. Some use similar colors such as orange or amber.

When your wireless charger Blinking yellow, orange, or amber, it means that there is an incorrect voltage charging problem, indicating that the input power supply or USB cable is insufficient for power supply.

In most cases, this will be a high or low voltage. This can cause overheating or very slow charging, or the wireless charger will not charge your phone.

A flashing yellow wireless charger issue has been reported on Samsung Dual/Duo wireless chargers.

Regardless of the wireless charger you use, the LED light may blink yellow if you are not using the wireless charger properly. Below are the reasons.

Read Also How To Find Dead Airpods
Samsung Wireless Charger Blinking Yellow
Samsung Wireless Charger Blinking Yellow

Troubleshooting Your Wireless Charger

Let’s start with a few steps to see what’s wrong here: your wireless charger, your phone, or the power supply. Your phone comes first, no matter the make or model, here are some tests to prove it:

·       Try charging your phone from a secondary source. This source can be a computer, wall charger, or anything else that has changed your phone before. If your phone does not charge like this then you need to investigate this issue further.

·       If you have one available, use a different phone with your wireless charger. If your wireless charger can easily charge another phone, then the problem is with your device.

·       When was the last time you turned off the phone completely? If you don’t remember, let it rest for a few minutes and turn it off, then try charging again.

If you can’t get your wireless charger to work with your phone after these three tests, you’ll need to troubleshoot your phone before doing anything else. If your phone isn’t the problem, let’s look at your power supply.

Read Also How To Keep MacBook Pro Cool
Samsung Wireless Charger Blinking Yellow
Samsung Wireless Charger Blinking Yellow

LED The indicator on the charging device

Different colors of LEDs indicate different states.

·       Flashing blue LED light – this indicates offload. The phone is not charging as it should. There is a technical error or change, and attention has been sought to resolve the issue. This is a warning sign that the phone/charger may overheat and be damaged.

·       Green LEDs – Indicates that the charge is complete. The phone can now be unlocked and used.

·       Red/Green or Yellow flashing light. – Indicates under voltage or overvoltage. It may also report a faulty adapter or cable.

·       STABLE BLUE LED – Lights up when you have your wireless charger plugged in and turned on, and the phone is placed on the charger to charge. This indicates that charging has started and the process is normal without any issues.

Read Also How To Find Stolen MacBook With Serial Number

If the error “Moisture detected” appears, dry the phone.

Some waterproof Samsung Galaxy devices may not charge when the charging port is wet. Dry your phone thoroughly with a clean, soft cloth before charging. Also, you need to make sure that the charging port is completely dry. Shake the phone gently to get the water or liquid out of the port. Once done, try to load again.

From experience, the humidity detection error only shows up when you try to charge a device via a cable, but some users have reported that wireless charging is affected as well. While this may seem counterintuitive, you still need to make sure that the charging port is completely dry before charging with a cable or wireless charger.

Read Also How To Lock MacBook Keyboard
Samsung Wireless Charger Blinking Yellow
Samsung Wireless Charger Blinking Yellow

Remove any objects, including phone cases

Do not put anything between the phone and the wireless charger, including a magnet on the phone case or the phone holder. These objects can interfere with the wireless charging process, causing the wireless charger to turn yellow and your phone not to charge.

If you prefer to charge through cases, make sure your wireless charger is case-compatible and your phone case supports wireless charging.

Read Also How To Clean iPhone Charging Port

Get a high-quality wireless charger

The above 4 methods can quickly solve the problem of the wireless charger turning yellow. If none of them work for you, you may have a faulty wireless charger. If it is still under warranty, contact the seller and replace it with a new one. Or you can get a new high-quality wireless charger.

Conclusion

Samsung Wireless Charger Blinking Yellow, Wireless Chargers Are Excellent When They Work, But Luckily They Weren’t Long To Recover When They Didn’t. Sometimes it is as simple as replacing the cable when other times it requires a little more effort, anyway, I have several steps to follow before resorting to replacement.

Read Also How To Connect Samsung TV To Wifi Without Adaptor
Samsung Wireless Charger Blinking Yellow