When refrigerator makers introduced the through-the-door ice and water dispensers, they had been a costly feature. But once the ice stops arriving, it may be frustrating. Most Whirlpool refrigerator owners wonder why the ice hockey does not function when the water flows.
All of us rely on our refrigerators, and many people use our grills regularly to dispense ice hockey. Therefore, in case you’ve got a Whirlpool side by side fridge not making ice, we are aware of your frustration.
Locating the issue with your Whirlpool fridge ice maker might not be as confusing as you might think. So, in order to fix it, you just have to follow the instructions given below very carefully or else you can contact a professional to fix it.
When you’ve got your Whirlpool Refrigerator ice maker not working but the water dispenser is functioning, it can be because the ice maker is switched off. Most Whirlpool grills use a cord shut-off arm to flip the ice blower off and on. The arm stops ice creation when it is in the raised position.
If you are thinking about how to turn on the Whirlpool fridge ice maker, just lower the wire shutoff arm and ice creation will last.
While this occurs, your own Whirlpool fridge blower not working will influence ice but water. Here is the way to reset the Whirlpool ice maker and eliminate jammed ice hockey:
Read Also How to Connect to 5 GHz wifi Windows 10
If the freezer temperature is over 10 degrees Fahrenheit (-12C), the ice maker won’t create ice cubes effectively. The freezer temperature ought to be set between 5 and 0 degrees Fahrenheit (-18 to -15C) for your ice maker to operate correctly. If the freezer is too large, guarantee that the condenser coils are filled with debris and the condenser fan is functioning correctly. Also, check whether frost has collected on the evaporator coils. If the evaporator coils have been frosted over, a part of the defrost system has probably failed.
The electrically controlled valve or you can say water inlet valve opens to provide water to the Ice Maker section and also to the dispenser. In the event the water inlet valve is defective, or if it’s inadequate pressure, then it won’t permit water to flow. Because of this, the ice maker won’t make ice.
The valve requires at least 20 psi to work properly. Ensure the water pressure into the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water heater valve.
The door turns off the water and ice dispenser once the fridge door is still open. In case the door change fails, then the dispenser won’t turn on. To learn whether the door switch is faulty, use a multimeter to check it for continuity. In case the door change doesn’t have continuity when triggered, and the last option to fix it is to replace it.
The icemaker module comes with a motor that spans the ice hockey ejector arms and turns out a tray to eject the cubes to the skillet. After the sensor or thermostat onto the ice maker tray reaches around 15 degrees Fahrenheit, the engine cycles start creating the ice cubes.
At the close of the cycle, then the icemaker module sends electricity to the water inlet valve to wash the tray with water. If the icemaker module is faulty, the ice maker will not create or distribute ice. So, must check it and try to fix it.
If your refrigerator is not making ice, the home may have insufficient water pressure. The water inlet valve or you can say electrically controlled valve supplies water to the ice maker section of the refrigerator and water dispenser. The water inlet valve requires a minimum of 20 psi to function properly. Check the water flow and test the pressure to determine whether it is at least 20 psi.
Read Also 15 Best Wireless HDMI Transmitter
The icemaker mold thermostat is a great thing for a refrigerator that works to monitor the temperature of the ice mold or ice tray. When the mold reaches the proper temperature, the icemaker ejects the ice cubes and refills the ice mold with water. If the mold thermostat is faulty, the ice maker will stop making ice. To learn whether the thermostat is faulty, use a multimeter to test it for continuity. If the mold thermostat doesn’t have continuity, replace it.
Many of the refrigerators including some Whirlpool refrigerators too, utilize an infrared beam to sense the level of ice in the ice mold. After the ice amount reaches the top of the bucket, it interrupts the infrared ray. The management board then shuts off the ice maker.
When the ice level drops under the beam, the management board signals the ice manufacturer to earn more ice. If the ice level control board fails, then the ice maker will stop making ice. If the ice level control board is getting power, but the ice maker won’t operate, replace the ice level, controller board.
The ice maker switch may be faulty. It can also happen that you or anyone in your family mistakenly turns off the Ice Maker switch. Examine the switch to make sure it is switched on. If the icemaker change is switched on, however, the ice manufacturer still is not working, use a multimeter to check the switch for continuity. If the icemaker change doesn’t have continuity, replace it.
A clogged water filter may limit the flow of water to the dispenser and prevent the ice maker from functioning correctly. The water filter should be replaced about every six weeks to keep appropriate water flow and ensure water quality. So, if your water filter has not been replaced for more than 6 months, make sure to replace it.
Most Whirlpool ice makers have a motor module mounted in front of the icemaker with pockets marked V, H, L, T, M, and N. These are evaluation points to create Whirlpool ice maker repair simple.
To get this modular only remove the cap off the front of the icemaker, note that on some side-by-side refrigerators the ice maker is mounted and you need to take the ice maker shed to remove the cover. To check this icemaker you will have to earn a jumper wire.
If there’s no ice in the mold, take that jumper wire and put one end in the hole marked V and the other end in the pit marked L just long enough to determine if water enters the icemaker then eliminate it. This ought to power the water valve and water must enter the ice maker.
Read Also 6 Best Wireless Headphones for TV
Now, I hope you all fully understand that Why Whirlpool Refrigerator Not Making Ice But Water Works? And the full solution to this problem. But always remember that if these methods are not working don’t unscrew anything, just call the service center and ask for professionals to fix your problem.
If you still try to do it on your own, then most probably you will damage your Whirlpool Refrigerator so it is better to ask for help from professionals.
Amazon Site is a participant of the Amazon Services LLC Associates Program, an affiliate advertising program that is designed to provide aid for the websites in earning an advertisement fee by means of advertising and linking to Amazon products.